IEEE802.3at / IEEE802.3af PoE PSE compatible Over-current protection Built-in AC/DC power supply DIP switch to set different configurations LFP (Link Fault Pass-through) support Choice of SC, LC, BiDi or other connectors for multimode and singlemode Standard SFP slot accepts any SFP transceiver modules
- The POE media converters fiber optic combine data received over a fiber optic link with -24, 48 or 52 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. Fiberbit's POE media converters fiber optic come in 10, 100, or 10/100 Power-over-Ethernet protocols.
- PoE media converters provide network distance extension with fiber cabling, and function as PoE injectors that enable powering devices such as IP-phones, video conferencing equipment, IP cameras and WiFi devices with Power over Ethernet (PoE) over UTP cabling.
- PoE media converter that provides 10/100 BASE-T UTP to 100BASE-FX or 100BASE-X fiber and supports Power-over-Ethernet (PoE and POE+). A variety of port configurations are available, including single or dual UTP or SFP ports.
- Complied with IEEE802.3at or IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3at or IEEE802.3af powered device (PD) over CAT5e/CAT6 UTP cable (cable length up to 100meters / 330feets).
- The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function, etc. The LFP (Link Fauit Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.
POE media converter fiber optic general specification
Technical Specifications:
Data Rates:
- 10/100 Mbps (IEEE802.3U IEEE802.3z 100Base-Tx)
- 100 Mbps (100Base-FX)
Input Power Requirements:
- Input voltage ........................... 100 VAC to 240 VAC
- Input frequency ................................. 47 Hz to 63 Hz
Power over Ethernet Output:
Pin Assignment and Polarity
- For IEEE802.3af standard:……1/2 (V+),3/6 (V-)
- For IEEE802.3at standard (30watts maximum): 1/2 (V+),3/6 (V-)
- For IEEE802.3at standard (50watts maximum): 1/2/4/5 (V+),3/6/7/8 (V-)
- Output Power…..please refer to ordering information
- Efficiency ....................................................75in
- Short circuit protection........................ auto recovery
- Over current protection ....................... auto recovery
Environmental Conditions:
- Operating temperature ....................... …0℃ to 50℃
- Cooling ........................................ free air convection
- Storage temperature ...................... -20℃ to +85℃
- Operating Humidity …... 90ax, non-condensing
Mechanical Specifications:
- -Case Material……………….…………………..Iron
- Case Color…………………………………….Black
- Net Weight………...…………….560g approx. / unit
- Dimensions…..……110(W) x 40(H) x 140(L) (mm)
- AC Inlet……………………………………IEC-J-4
- LAN……………………………….Shielded RJ-45
Accessories
