Converts 1 Video to Fiber Optic Cables Additional ports can be Audio, Ethernet, Voice FXS/FXO and RS-232 Dry relay I/O supported (N/O or N/C) RoHS Compliant and Lead-Free SC/FC & ST connectors as choice Have chassis & standalone versions No delay at transmission, Plug & Play.
- 8/10-bit digitally encoded and non-compression video transmission
- Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS- 422, and RS-485 data protocols
- Support any high-resolution video signal
- Automatic compatible PAL, NTSC and SECAM video system
- Power supply and other parameter state indication, which can monitor the operation condition of system
- Support no-damage regenerative trunk of video
- Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required
- Special ASIC design
- Industry-grade of operating temperature from -30 to +75, which is applied to the different working environment
- Hot-swap function
- Stand-alone type or card-type installed in 19’’ 2U or 4U rack-mount chassis.
- Fiberbit Video To Fiber Converters series supports any high resolution dynamic or stationary picture high-fidelity transmit. It also can be anti-disturbance against several signals, environment, and work stably. It is widely used in security monitoring and control, high way, electronic policy management, automation control, intelligent residential districts and so on.
- It can work shortly after it is installed. You could select any date interface by set. It is connected easily and it can indicate power supply, link, video, also adjust video. There are three way installation kits available: desktop and rack mount;
- Adopting WDM technology, these converters takes only one fiber cable to transmit and receive data, which will save half cabling cost for you.
- BiDi WDM - Wave Division Multiplexing Technology allows you use just a 1 fiber cable instead of 2, because transmit and receive channels are separated by different wavelengths.
- Card type or independent structure, which is applied to centralized management 2u or 4Uchassis
- 8/10-bit digital code and non-compression type video transmission
- Support any high-resolution video signal
- 5Hz-10MHz video channel
- Automatic compatible PAL, NTSC and SECAM video system
- With APC circuit, constant input optical power, and large dynamic range
- Low delay optical fiber transmission, large capacity, and easy to upgrade
- Power supply and other parameter state indication, which can monitor the operation condition of system
- Support no-damage regenerative trunk of video
- Advanced self-adapting technology, and it is unnecessary to implement the adjustment of spot electrics or optics when using
- Industry-grade design and modularization design make the equipment reliable and flexible
- Can automatically restore the fuse of power supply
- Full built-in power supply, and the appearance design of shell is unique.
- External dimensions (94mmX70mmX26mm)
- Internal power dissipation of power supply: 2.6W (Input: AC 140~260V)
Applications
- Intelligent Transportation System
- Public Security Surveillance
- High Way & Toll Station Surveillance
- High Quality Video Conference
- Industrial Closed Circuit Television Surveillance
Video to Fiber Converter general specification
Parameter
Specifications
Video Video interface number 1 channel video Bandwidth of video 8MHz Video input & output impedance 75 Ω (imbalance) , BNC Video input & output voltage 1Vpp Differential gain DG <1% ( typical value) Differential phase DP <0.6° ( typical value) Weighted signal-to-noise ratio S/N ≥ 67dB Data Physical interface The industry standard connecting terminal Interface Signal RS485/RS422/RS232/Manchester Code rat 0-400Kbps BER < 10 -9 AUDIO Interface port lotus block industrial standard port Audio input/output impedance 600Ω(balance/imbalance) Audio input/output voltage 2Vpp (typical value) Audio input/output level 0 dbm (typical value) Audio bandwidth 10Hz~20kHz Audio digital bandwidth 24 bit Andio signal-to-noise ratio S/N ≥95Db ( weighted) Ethernet Physical interface RJ45 Operating mode Full dulex / half dulex Support agreement IEEE802.3 10/100M adaptive Phone Physical interface RJ11 Voice bandwidth 8kHz Special function Support the call display, with hands-free function Working mode Point-to-point hotline or FXO/FXS type Optical Connector FC/ST (optional) Fiber type single-mode fiber, single fiber Transmission distance single mode 20Km, 40 km, 60 km, 80 km 100 km or Multimode Environmental demand environmental temperature -30 to +75 celsius Storage environment -30 to +75 celsius Relative humidity 0-95% ( no condensation) Power supply voltage AC220V/50Hz or 48VDC or 12VDC
Accessories
