Converts between 10/100BaseT to 100BaseFX LLF - Link Loss Feature (option) Uses only 1 fiber (WDM) 1310/1550 nm or 1490/1550 nm RoHS Compliant and Lead-Free SC/FC & ST connectors as choice Universal - Can be used in Chassis as well MTU size 1600+
Fiberbit Single Fiber Media converter complies with IEEE 802.3 standards. It is designed to convert data signal between 10/100 Base-TX and 100 Base Fx Fast Ethernet. The media converter is connected between Fiber cable and twisted cable segments with network operating smoothly.
This converter can be used as a standard alone unit or a slide-in module to fit the 19 converter rack.
Adopting WDM technology, these converters takes only one fiber cable to transmit and receive data, which will save half cabling cost for you.
BiDi WDM - Wave Division Multiplexing Technology allows you use just a 1 fiber cable instead of 2, because transmit and receive channels are separated by different wavelenghts.
Converters universal - they can work as standalone modules in point to point applications with external power supply modules - or same converter can be used as a plug in module in FB-C14 chassis. Such universal design, made by Fiberbit saves a lot of money and time to your network planning - you no need thing, how much units you need as standalone and how much units you need as plug in modules in chassis - just order same module and decide later.
Also, it does not matters, what type of TX/RX are you using at central side or remote side, they will always operate smooth.
- Complies with IEEE802.3 and IEEE802.3u 10/100Base-TX and 100Base-FX
- MTU size supported 1600 bytes maximum
- Supports pure converter mode data forwarding for extreme low latency
- Built in 128Kb RAM for data buffer
- Supports modified cut-through frame forwarding for low latency
- Optional forward fragments
- 10/100Mbps and full/half duplex automatically configure in TP port
- Supports end fault function (optional)
- MDI/MDI-X Auto Negotiation
- Support EEPROM configuration
- LED Indicators: POWER, FX LINK/ACT, 100, TP LINK/ACT, FDX/COL.
- FCC Class A & CE approved
- LLR, LFP - Link Loss Return (LLR), Link Failure Pass (LFP) features supported (please mention this when place order or require price, by default this feature is not included)
- RoHs compliant
- Only 1 fiber used instead of 2 - WDM BiDi technology
- Stainless steel parts (value added feature)
- Standalone, Wallmount or Hotpluggable in 19' chassis - universal design
Standards
- IEEE802.3 ETHERNET STANDARD IEEE
- 802.3u FAST ETHERNET STANDARD
Single Fiber Media Converter general specification
- Cable to be used: Multimode & Single mode Fiber - Twisted Pair
- Transmission Type: 10/100M FDX/HDX
- MTBF: >3 years
- BER: <1E-8
- Data Buffer: 128Kb
- Power temperature variation: 0．2mw/℃
- Input Power Range (dBm): For single mode type:0~-40, for Multimode: 0~-30
- Operate Temperature: 0℃~70
- Storage Temperature: -45℃~80℃
- Imax: 800mA
- Power: 2．5w
- EMC: FCC Part15
- Size: 95×70×26mm (external power) or 140×110×30mm (internal power)
- Wavelengths split Tx/Rx - 1310/1550 nm vs 1550/1310 nm for distance up to 80 km
- For distances more than 80 km - 1490/1550 nm vs 1550/1490 nm used
Accessories
