Taiwan Quality Remote Support

PoE Media Converter (PSE) – 10/100/1000Base-TX to 1000Base-FX

Features


  •  IEEE802.3at / IEEE802.3af PoE PSE compatible

  •  Over-current protection

  •  Built-in AC/DC power supply

  •  DIP switch to set different configurations

  •  LFP (Link Fault Pass-through) support

  •  Choice of SC, LC, BiDi or other connectors for multimode and singlemode

  •  Standard SFP slot accepts any SFP transceiver modules

SPOTLIGHT

FB-MCGAS-POE  series is a 10/100/1000Base-TX to 1000Base-FX SFP slot based fiber PoE media converter, which allows two types of network segment to be connected easily.

Applications

Fiberbit's PoE Media Converters transparently connect copper to fiber while providing Power over Ethernet ( PoE ) to standards-based PoE compliant devices such as IP cameras, VoIP phones and wireless access points. POE media converters simply combine data received over a fiber optic link with -48VDC, 52V or 25VDC (depending on model).

  • Powering end devices, like IP cameras, VoIP phones

  • Remote monitor for traffic, industrial, military control

  • CPE's in remote areas

  • Military applications, Temporary access after disasters

  • Special cases, contact our sales


PoE Media Converter
Description

  • The POE media converters combine data received over a fiber optic link with -24, 48 or 52 VDC power; providing power to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded twisted pair cable. Fiberbit's POE media converters come in 10, 100, or 10/100 Power-over-Ethernet protocols.

  • PoE media converters provide network distance extension with fiber cabling, and function as PoE injectors that enable powering devices such as IP-phones, video conferencing equipment, IP cameras and WiFi devices with Power over Ethernet (PoE) over UTP cabling.

  • PoE media converter that provides 10/100/1000BASE-T UTP to 100BASE-FX or 1000BASE-X fiber and supports Power-over-Ethernet (PoE and POE+). A variety of port configurations are available, including single or dual UTP or SFP ports.

  • Complied with IEEE802.3at or IEEE802.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with 48V (or other voltage) power supply, providing power to IEEE802.3at or IEEE802.3af powered device (PD) over CAT5e/CAT6 UTP cable (cable length up to 100meters / 330feets).

  • The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function, etc. The LFP (Link Fauit Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.


 


 

 
Specifications

POE media converter for fiber general specification




Technical Specifications:

Data Rates: 

  • 10/100/1000Mbps (IEEE802.3U IEEE802.3z 1000Base-Tx)

  • 1000Mbps (1000Base-FX) or 100Mbps (100Base-FX)



 

Input Power Requirements:

  • Input voltage ........................... 100 VAC to 240 VAC

  • Input frequency ................................. 47 Hz to 63 Hz


 

Power over Ethernet Output:

Pin Assignment and Polarity

  • For IEEE802.3af standard:……1/2 (V+),3/6 (V-)

  • For IEEE802.3at standard (30watts maximum):  1/2 (V+),3/6 (V-)

  • For IEEE802.3at standard (50watts maximum): 1/2/4/5 (V+),3/6/7/8 (V-)

  • Output Power…..please refer to ordering information

  • Efficiency ....................................................75in

  • Short circuit protection........................ auto recovery

  • Over current protection ....................... auto recovery


Environmental Conditions:

  • Operating temperature ....................... …0℃ to 50℃

  • Cooling ........................................ free air convection

  • Storage temperature ...................... -20℃ to  +85℃

  • Operating Humidity …... 90ax, non-condensing


 

Mechanical Specifications:

  • -Case Material……………….…………………..Iron

  • Case Color…………………………………….Black

  • Net Weight………...…………….560g approx. / unit

  • Dimensions…..……110(W) x 40(H) x 140(L) (mm)



  • AC Inlet……………………………………IEC-J-4

  • LAN……………………………….Shielded RJ-45


 

 
Ordering Information
FB-MCGAS-POE-1-XX IEEE 802.3af standard POE media converter for fiber, output voltage: 48V, Output current: 0.35A max, Output Power: 15.4W max.
FB-MCGAS-POE-2-XX IEEE 802.3af standard POE media converter for fiber, output voltage: 48V, Output current: 0.54A max, Output Power: 25W max.
FB-MCGAS-POE-3-XX IEEE 802.3at standard POE media converter for fiber, output voltage: 52V, Output current: 0.60A max, Output Power: 30W max.
FB-MCGAS-POE-4-XX IEEE 802.3at standard POE media converter for fiber, output voltage: 52V, Output current: 1.00 A max, Output Power: 50W max.
FB-MCGAS-POE-5-XX Non standard POE media converter for fiber, output voltage: 48V, Output current: 0.60 A max, Output Power: 30W max.
FB-MCGAS-POE-6-XX Non standard POE media converter for fiber, output voltage: 24V, Output current: 1.20 A max, Output Power: 30W max.
-XX Indicates fiber type and distance, like for example S20 - Single Mode dual fiber 20 km, etc.
Accessories
Share