Compliant with major switch vendors 1270nm Transmitter and 1330nm Receiver Distance up to 20Km on 9/125um SMF RoHS Compliant and Lead-Free Single 3.3V power supply and Low power dissipation <1.5W Support 9.95328Gbps and 10.3125Gbps Data Rate Compliant with SFF-8431SFP+ MSA and SFF-8472 Digital Diagnostic Monitor Function
Part No.
Package
Data Rate
(bps/Hz)Pout(dBm)
Sensitivity
(dBm)Temp
°CReach
Other Option
FB-BD-SFP+/20
BIDI SFP+
10G
-4.5~0.5
<-14.4
-5℃~85℃
20km
DDM
FB-BD-SFP+/10
BIDI SFP+
10G
-6~0.5
<-14.4
-5℃~85℃
10km
DDM
Fiberbit bidi SFP+ Transceiver Modules are certified 100 % compliant in all OEM applications. They are pre-configured with an application specific code to meet the requirement set forth by the router and switch OEMs. Fiberbit SFP+ Transceiver perform, fit and function is perfectly designed to match any vendors switch, be it Cisco, Huawei or others. Our transceivers fully comply with the multi-sourcing agreement (MSA) which enables them to work in all MSA compliant platforms. Fiberbit brand transceivers also function with other brands within the same network.
By using only 1 fiber, and still transmitting 10G over distances up 20 km, network operators can greatly save the OPEX, as a result of renting one fiber instead of two. bidi SFP+ transceiver works on a 2 wavelength - 1270 % 1330 nm.
- Smallest 10G form factor
- Supports 10GBASE Ethernet and OTU2/OTU2e
- Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a any vendor switch
- Provides flexibility of interface choice
- Supports “pay-as-you-populate” model
- Supports digital optical monitoring capability
Standards:
- GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable
- GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies
- GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors
- IEEE 802.3: 10-Gigabit Ethernet
- ITU-T G.709: Interfaces for the Optical Transport Network
- ITU-T G.975: GFEC
- ITU-T G.975.1: EFEC
- SFP+ MSA SFF-8431 (Optical Modules, Active Optical Cables, and Passive Twinax cables)
- SFP+ MSA SFF-8461 (Active Twinax cables)
Safety:
- Laser Class 1 21CFR-1040 LN#50 7/2001
- Laser Class 1 IEC60825-1
- Cable jacket of SFP+ copper modules is UL #E116441 Compliant
- All length SFP+ copper cables are ELV and RoHS Compliant
BiDi SFP+ transceiver general specifications
