Taiwan Quality Remote Support

SGMII SFP transceiver module 100/1000BaseFX


  •  Compliant with major switch vendors

  •  SGMII interface be built in SFP

  •  Typical Center Wavelength:1310nm

  •  RoHS Compliant and Lead-Free

  •  Digital diagnostic compatible with SFF-8472

  •  Duplex LC Connector

  •  Hot-pluggable SFP footprint


100M/1000M SFP Optical Transceiver with SGMII Interface with 1310nm FP Transmitter and PIN Receiver


SGMII SFP transceiver is designed for 100/1000BASE-FX applications, which requires support with build-in PHY device supporting SGMII interface.

  •  Ethernet swiches which has SFP sockets (slots)

  •  Routers with SFP slots

  •  SDH, STM-4/16 multiplexers

  • ATM/XPON OLT's uplink ports

  • Network interface cards

Quick Specs

Part No. Type Data Rate Tx(nm) Pout(dBm) Rx Sensitivity Temp Reach
(dBm) °C
 FB-SFP-SGMII-10 100/1000M SGMII SFP 1.25G 1310nm FP -9.5~-3 PIN+TIA -22 0~70 10km
Fiberbit SGMII SFP is designed for 100/1000BASE-FX applications, with build-in PHY device supporting SGMII interface. The standard serial ID information Compatible with SFP MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM protocol. For further information, please refer to SFP Multi-Source Agreement (MSA). SGMI SFP transceivers are 100BASE-FX Small Form-Factor Pluggable (SFP) Fast Ethernet Interface Converter on Gigabit SFP Ports.

sgmii sfp transceiver dimensions

Detailed Features

  • Duplex LC Connector

  • Support hot-pluggable

  • Metal with lower EMI

  • Excellent ESD protection

  • SGMII interface be built in SFP

  • Typical Center Wavelength:1310nm

  • RoHS Compliant and Lead-Free

  • 1310nm FP Transmitter and PIN Receiver

  • Digital diagnostic compatible with SFF-8472

  • Single 3.3V power supply and Low power dissipation

Regulatory Compliance 

  • Compliant with SFP+ MSA: INF-8074i

  • Compliant with SFF-8472 Rev9.5

  • Compliant with IEEE802.3-2005

  • Compliant with G.957

  • ESD to the Electrical PINs: compatible with MIL-STD-883E Method 3015.7

  • ESD to the Duplex LC Receptacle: compatible with IEC 61000-4-2

  • GR-1089-CORE

  • Immunity compatible with IEC 61000-4-3

  • EMI compatible with FCC Part 15 Class B EN55022 Class B (CISPR 22B)

  • VCCI Class B

  • Laser Eye Safety compatible with FDA 21CFR 1040.10 and 1040.11 EN60950, EN

  • (IEC) 60825-1,2

  • RoHS compliant with 2002/95/EC 4.1&4.2 2005/747/EC


SGMII SFP transceiver general specifications

sgmii sfp transceiver general specifications

sgmii sfp transceiver transmitter specifications

sgmii sfp transceiver receiver specifications
Ordering Information
FB-SFP-SGMII-10 SGMII PHY compliant SFP transceiver,up to 10 km, -5℃~+70℃, 1310 nm SM dual fiber
FB-SFP-SGMII-2 SGMII PHY compliant SFP transceiver,-5℃~+70℃, up to 2 km, 850/1310 nm MM dual fiber


Modern networks rarely rely on pure topologies like bus, ring, or star. Most common solutions use hybrid topologies, which are combinations of features from those three.   Star-Wired Ring As it is clear from the name, star-wired ring topology has features of star and ring topologies. You can see example of this topology ...